manualshive.com logo in svg

Samsung SyncMaster 400BX, Руководство пользователя, Страница: 83 / 171

Поделиться
Скачать
Samsung SyncMaster 400BX Скачать руководство пользователя страница 83

83

Using MDC

3

3 Using MDC

8

Color Temp

Change the color temperature for the selected display.

9

Brightness Sensor

 

Not available on this product.

 

Enable or disable Brightness Sensor for the selected display.

Brightness Sensor detects ambient light intensity and automatically adjusts the screen brightness.

10

Dynamic Contrast 

Change the Dynamic Contrast for the selected display.

 

z

Changes will only be applied to the displays that are powered on. If no display is selected, the 

factory default values will be displayed.

z

Some products may not support DP mode.

z

Some products may not support Brightness Sensor mode.

z

Color Temp is enabled when Color Tone is set to Off.

z

Magicinfo only functions on products that have the MagicInfo function.

z

TV mode is only available on products that have the TV function.

 

Содержание SyncMaster 400BX












































































































































































Отзывы:

Нет отзывов