Samsung SyncMaster 400BX Скачать руководство пользователя страница 32

Страница: 32 / 171

Preparations

1 Preparations

1.4

VESA Bracket (hanger) Installation

1.4.1

VESA Bracket (hanger) Installation

The VESA bracket must be installed in accordance with the VESA standards.

Purchasing and installing a VESA bracket: Contact your nearest Samsung dealer to order a VESA

bracket. After an order has been placed, a technician will visit you to install your VESA bracket.

Samsung is not held responsible for any damage to the product or injuries sustained as a result of

the product being installed by an unqualified individual.

Installation Measurements

Be sure to use machine screws with a diameter of 6 mm and a length of 8 mm to 12 mm to install the

bracket on a wall.

Installing a Bracket

The bracket must be installed by a qualified technician.

Samsung is not held responsible for any damage to the product or injuries sustained as a result of

the product being installed by an unqualified individual.

The bracket must be installed in a cement wall. Installation in a plaster or wooden wall is unstable

and the product may fall off.

400.0

Содержание SyncMaster 400BX












































































































































































Результаты поиска

Содержание SyncMaster 400BX

Отзывы:

Samsung SyncMaster 400BX, Руководство пользователя, Страница: 32 / 171

Результаты поиска

Содержание SyncMaster 400BX

Отзывы: