RJ 45 MDC (MDC PORT)
MDC(Multiple Display Control) Program Port
Connect the LAN cable to
[RJ45 MDC]
on the
product and LAN on the PC. To use an MDC,
the MDC Program must be installed on the
PC.
Note
Go to
Multi Control
and select
RJ45 MDC
as the
MDC Connection
.
RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
Connect a serial cable (cross type) to
[RS232C]
on the product and RS232C on the
PC. To use an MDC, the MDC Program must
be installed on the PC.
Note
Go to
Multi Control
and select
RS232C
MDC
as the
MDC Connection
.
Applicable to the MXn-3, MPN-3 model only
RGB OUT
MagicInfo
video output port
MAGICINFO OUT
This is the output terminal for the video, au-
dio, and control signals of
MagicInfo
.
It can be used by connecting it to the
[HDMI
IN 2 (MAGICINFO)]
terminal using a DP to
HDMI cable.
LAN (LAN Connection Terminal)
Connects to a LAN cable to allow Internet or
network access in
MagicInfo
mode.
USB (USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device
Compatible.
Introduction
