background image

TYPE OF LAUNDRY

Thin(synthetic fiber)

wool

cotton

thick(cotton)

WASHING 
SELECTION

NORMAL

SOFT

WASHING TIME

10 to15minutes

8 to10minutes

7minutes

2 to 5minutes

2 to 5minutes

KINDS OF CLOTHING

Extremely solid heavy fabric

Linen,cotton,etc.

Ordinary clothes

(underwear,etc)

Slightly solied synthetic

fiber

100%wool,mixed wool knitting,

thin synthetic fiber with tags

indicating hand washing

TROUBLE

The washer
does not work.

Clothes will
not move freely.

Incomplete
spinning

TROUBLE

Incomplete
draining

The spin dryer
basket will not
run.

CHECK POINT

Check that the power cord is
connected to a power outlet well.
Power stoppage?

Is the laundry overloaded?

Are the laundry arranged evenly?

WASHING TIME 

INSTALLATION

Leave some space 

Space at least 15cm between the washer 
and the wall.

Place the washer on a sturdy flat surface.

If the washer is placed on an uneven or weak 
surface, noise or vibration may be occured.
(Allowable is 2 )

Never install the washer near water.

Do not place the washer in steamy rooms or 
where the washer is directly exposed  to rain.
Moisture may destroy the electrical insulation 
and  cause  an electrical shock hazard.

Avoid direct sunlight or heating devices.

As plastic and electrical components are 
affected by direct heat, never place the
washer near heaters, boilers,etc. 
Do not place under direct sunlight.

CONNECTING THE DRAIN HOSE

1. Before connecting the drain hose, remove the 

cover (a) from the drain hole.

2. After pressing the joint ring (b), insert the drain

hose(c) to drain direction.

(In case of pump drained washer)

LAUNDRY GUIDE

MAINTENANCE

TROUBLE SHOOTING

CLEANING THE MACHINE

5

6

ENVIRONMENT

SPIN DRY TIME

DETERGENT

CLENING THE LINT FILTER

If the dregs are filled up in the lint filter after
finishing the wash, push down and pull it 
out as shown in figure.
Remove the collected lint and rinse the filter net. 

OVERFLOW FILTER

Pull the upper side of the overflow filter 
with two fingers into the hole ‘A’
in the direction of arrow as 
shown in the figure.

CLEANING THE WASH TUB

First,fill water in the wash tub to ‘L’ level, then drain 
water from the wash tub simultaneously with 
operating wash cycle for 1~2 minutes.

Close the wash tub lid.

WHEN YOU LOAD THE LAUNDRY INTO
THE SPIN BASKET.

Press the laundry evenly and put the safety
cover into the spin basket drum as shown in
the figure.

TO PICK OUT THE CLOTHING WHICH HAS
FALLEN BETWEEN THE BASKET AND TUB.

For safty,pull  the power supply plug out of the socket. 

DRAIN FILTER

In case of incomplete drain,disassemble 
the drain filter with screw ), and 
remove lints from the filter as shown 
in the filter as shown in the figure.

TIME

1min.

1~2min.

3~5min.

5min.

AMOUNT OF
DETERGENT

30g

40g

50g

WATER

LEVEL

Low    (30

)

Middle(40

)

High    (50

)

The amount of detergent is average.
Follow the instruction detergent printed 
on the package for amount of detergent.
Choose the amount of detergent 
depending on the fabric type.

CHECK POINT

Is the filter clogged 
with lint?

See “Cleaning the  

machine” on page 5.

Is the spin dryer lid closed 
completely?
Are laundry(socks,etc.) falling
out of the spin dryer basket and 
clinging to the axle?

See To pick out... on  page 6.

70~80cm

Lay down the washer with its back facing downward.
Insert four legs into the leg mounting sections of the 
base corners of the main body.
Insert the claw of the leg with the
square hole of the leg 
mounting section, and 
push the leg in the arrow 
direction as shown in the 
figure until it clicks.

Claw

Square hole

Bottom face of main body

LEG

A

MOUNTING THE LEGS 

1.Disassemble a screw from the spin dryer hatch.
2.The spin dryer hatch is fixed to the brim by the concave and convex 

parts at two places. 
Expand the concave and 
convex parts, and pull up
the spin dryer hatch to remove it. 

3. Remove the clothing 
4. Close the spin dryer hatch.

Push in hatch firmly until
the catch at the front is 
engaged securely.

Install the drain hose about 
70~80cm above the ground 
for pump model.

1

2

CLEANING THE WASHER BODY

Wipe off strains on the cabinet and operation panel 
with soft cloth.Do not use benzene, thinners, cleanser,
or wax, nor scrub the washer with a brush.
Painted surfaces or piastic parts wii be damaged.

(C)

(b)

(C)

(b)

(a)

1

2

Содержание SWT65D2

Страница 1: ...only This appliance is to be connected to the water mains using new hose sets and that old hose sets should not be reused Ventilation opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor Be sure to cover with the inner cover on laundry before spinning This prevents laundry from being tossed out and damaged Before washing check all pockets If nails o...

Страница 2: ...he washing tub 3 Set the WASH TIMER 2 3minutes 3 As soon as the WASH TIMER shuts off turn off the water tap 1 Keep suppling water adjust water pressure to ensure that the amount of water supplied does not exceed that water drained 4 Drain the water Set the CYCLE SELECTOR KNOB to DRAIN 5 Repeat this cycle until drain water is clean 2 3 cycle 2 Set the WASH TIMER 6 8minutes 4 Set the CYCLE SELECTOR ...

Страница 3: ... as shown in the figure CLEANING THE WASH TUB First fill water in the wash tub to L level then drain water from the wash tub simultaneously with operating wash cycle for 1 2 minutes Close the wash tub lid WHEN YOU LOAD THE LAUNDRY INTO THE SPIN BASKET Press the laundry evenly and put the safety cover into the spin basket drum as shown in the figure TO PICK OUT THE CLOTHING WHICH HAS FALLEN BETWEEN...

Страница 4: ...ECIFICATION DIMENSIONS mm WATER PRESSURE WEIGHT EXTRACTION EFFICIENCY STANDARD QUANTITY OF WATER RATING TIME CAPACITY Maximum dry mass textiles MOTORMAXINPUT DC68 00274A Owner s Instructions FEATURES 1 CAUTIONS 1 PRECAUTIONS WHEN OPERATING 1 DESCRIPTION OF PARTS 2 CONTROL PANEL 2 WASHING PROCEDURE 3 TO WASH 3 SPIN DRY 3 RINSING 4 OVER FLOW RINSE 4 ADDITIONAL RINSE 4 INSTALLATION 5 ENVIRONMENT 5 CO...

Отзывы: