background image

ADDITIONAL RINSE

(SHOWER RINSE)(FOR SW-T65B1, SWT65C1

-Option

)

WASHING PROCEDURE

3

4

SPIN DRY

1. Before starting washing, check following;

Connect the water supply hose.
-  Lay  the drain hose down toward a sinkhole.

(In case no drain pump)

-  Place the drain hose in sink or bath.

(In case drain pump)

-  Connect the power cord to the power supply  outlet .    

Set the WATER SELECTOR
KNOB to
SPIN and CYCLE
SELECTOR KNOB to
‘DRAIN’.

4. Set the CYCLE SELECTOR KNOB   to

WASH

RINSE .

(in case drain pump  WASH )

5. Fill water in the wash tub 

to the  L lower water 
level by carefully and 
add the detergent.

6. Load laundry in the 

wash tub and fill 
water to proper 
water level.

7. Set the  WASH TIMER 

1-15minutes.

8.  After washing,set the

CYCLE SELECTOR KNOB 
to  ‘DRAIN for drain.

1. Transfer the clothes into the spin basket

and arrange the clothes evenly.

RINSING

OVER FLOW RINSE

1. Set the  CYCLE SELECTOR KNOB to

WASH RINSE .

(In case drain pump  WASH )

2. Supply the proper amount of water 

as not to  overflow the top of the 
washing tub.

3. Set the WASH TIMER 

2~3minutes.

3.As soon as the WASH TIMER 

shuts off, turn off the water tap.

1.Keep suppling water

(adjust water pressure

to ensure that the amount of water supplied
does not exceed that water drained.)

4. Drain the water.

Set the  CYCLE 
SELECTOR 
KNOB to  DRAIN

5.Repeat this cycle until drain water 

is clean. (2~3 cycle)

2.Set the WASH 

TIMER 6~8minutes.

4. Set the CYCLE 

SELECTOR KNOB

to

DRAIN .

3. Close the spin dryer lid.

4. Set the SPIN DRY TIMER 1-5minutes.

2. Be sure to attach the safety cover and

close the inner lid.

inner lid

safty cover

1

2

3

4

5

6

inner lid

safety cover

NORMAL

SOFT

2. Set the WASH SELECTOR KNOB 

to the desired mode. 

WASH SELECTOR

WASH          SPIN

WASH          SPIN

3. Set the WATER SELECTOR KNOB 

to the desired mode.

(FOR SW-T65B1, SWT65C1)

TO WASH

After rinsing you can select this
course for more effective rinse
(Don't select only this course 
for rinse.) 
Load the laundry 
evenly into the spin basket.

Supply  water for about 1minute.
Adjust the water flow to prevent
overflow from the wash tub. 

After stopping water 
supply, cover the 
laundry with safety cover
and close the inner lid.

Close the spin dryer
lid.

Set the SPIN DRY
TIMER 2~3 minutes.

Содержание SWT65D2

Страница 1: ...only This appliance is to be connected to the water mains using new hose sets and that old hose sets should not be reused Ventilation opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor Be sure to cover with the inner cover on laundry before spinning This prevents laundry from being tossed out and damaged Before washing check all pockets If nails o...

Страница 2: ...he washing tub 3 Set the WASH TIMER 2 3minutes 3 As soon as the WASH TIMER shuts off turn off the water tap 1 Keep suppling water adjust water pressure to ensure that the amount of water supplied does not exceed that water drained 4 Drain the water Set the CYCLE SELECTOR KNOB to DRAIN 5 Repeat this cycle until drain water is clean 2 3 cycle 2 Set the WASH TIMER 6 8minutes 4 Set the CYCLE SELECTOR ...

Страница 3: ... as shown in the figure CLEANING THE WASH TUB First fill water in the wash tub to L level then drain water from the wash tub simultaneously with operating wash cycle for 1 2 minutes Close the wash tub lid WHEN YOU LOAD THE LAUNDRY INTO THE SPIN BASKET Press the laundry evenly and put the safety cover into the spin basket drum as shown in the figure TO PICK OUT THE CLOTHING WHICH HAS FALLEN BETWEEN...

Страница 4: ...ECIFICATION DIMENSIONS mm WATER PRESSURE WEIGHT EXTRACTION EFFICIENCY STANDARD QUANTITY OF WATER RATING TIME CAPACITY Maximum dry mass textiles MOTORMAXINPUT DC68 00274A Owner s Instructions FEATURES 1 CAUTIONS 1 PRECAUTIONS WHEN OPERATING 1 DESCRIPTION OF PARTS 2 CONTROL PANEL 2 WASHING PROCEDURE 3 TO WASH 3 SPIN DRY 3 RINSING 4 OVER FLOW RINSE 4 ADDITIONAL RINSE 4 INSTALLATION 5 ENVIRONMENT 5 CO...

Отзывы: