18_installation & maintenance
installation & maintenance_19
HOW TO ADD THE FABRIC SOFTENER
Slide and open the cover in the direction of the arrow, insert the rinse detergent, and slide and close it in the
reverse direction.
•
When a proper amount (one time does) of fabric softener is stored in the
softener inlet,it is automatically put in at the last rinsing cycle.
•
Do not use detergent, bleach or starch into the Softener Inlet.
•
Using too much softener may produce unsatisfactory results.
•
Do not open the lid during the Spin Dry cycle. If added too early, its effectiveness
will decrease.
•
Do not leave the softener into the Softener Dispenser for a long time. Because
softner became stiff.
WATER SUPPLY CONNECTOR FILTER
1.
Pull out the filter and wash well.
2.
Pull in the filter and connect the hose to the inlet water
valve tightly.
3.
Check if there is a leakage.
Note to tighten up the connector.
CLEANING THE FILTER
Clean the filter net often to keep the washer clean.
1.
Push the upper part of the Magic filter
and pull in.
2.
Open the cover as shown in the figure.
3.
Clean the Magic filter.
4.
Close the cover and insert the lower part of
the filter in the basket first and then push the
filter with “click” sound.
03 INST
ALLA
TION & MAINTENANCE
