Samsung SVR-960A Скачать руководство пользователя страница 44

Страница: 44 / 90

User Manual

6.5.2 Setup by Channel

It can set Time Schedule, Macro differently by each channel.

It sets 1~4CH to Weekday day, Low, and can set 5~9 to Full Time, High

Recording Speed/Quality

There are total 5 setup conditions. (No Rec./Low/Standard/High/Custom).

“Custom” can set the status of Speed, Quality and Resolution to user wants.

Resolution

There are total 3 setup conditions. (CIF/HALF/D1)

Resolution value set here is applied to user’s recording, Event recording.

CIF : 360x240 @ NTSC, 360x288 @ PAL

HALF : 720x240 @ NTSC, 720x288 @ PAL (HALF D1 image)

D1 : 720x480 @ NTSC, 720x576@ PAL (FULL D1 image)

Special Time Recording

This menu is used when it differ recording condition with setup specific time zone. Namely, if it

sets specific time zone to Weekday Day, it can record differently according to 2 setup conditions.

Specific time zone sets from ‘System’ menu.

There are total 5 setup conditions; No Rec./Low/Standard/High/Same as above (“Recording

apply same value set from Speed/Quality”)

Event Recording

It sets “On/Off” using left/right button or mouse after pressing [ENTER].

Detailed Event recording condition sets from “Event Recording” menu.

According to Event recording setup, it can set here whether it records based on Event recording

Содержание SVR-960A



























































































Результаты поиска

Содержание SVR-960A

Отзывы:

Samsung SVR-960A, Руководство пользователя, Страница: 44 / 90

Результаты поиска

Содержание SVR-960A

Отзывы: