GB
37
GB
36
Technical Specifications
Design and specifications are subject to change without notice.
Format
VHS PAL standard
Heads
Video: 4 rotary heads
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
Receiving channel
VHF-I, VHF-III, UHF, Interband/Hyperband
Television system
STANDARD B/G-D/K
Luminance
FM azimuth recording
Colour system
PAL/MESECAM/NTSC: Down converted subcarrier phase shifted
direct recording
NTSC PB on PAL TV
<PAL/MESECAM>
<NTSC>
Tape speed
SP
23.39 mm/sec
SP
33.35 mm/sec
LP
11.69 mm/sec
SLP
11.12 mm/sec
<PAL/MESECAM>
Recording/playback time
SP
3 hours (E-180 Tape)
LP
6 hours (E-180 Tape)
REW time
About 60 sec in REW with E-180
VIDEO
Input
0.5 to 2.0 Vp-p; 75 ohm unbalanced
Output
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Signal-to-noise ratio
Better than 43 dB (SP)
Horizontal resolution
More than 240 lines (SP)
AUDIO
Input
-8 dBm, 47 Kohm unbalanced
Output
-8 ± 3 dBm, 1 Kohm unbalanced
Wow and flutter (WTD)
0.4% max (SP)
Signal-to-noise ratio
68 dB min (IHF A filter)
Frequency response
20Hz - 20kHz
Power requirement
AC 100-240V 50/60 Hz
Power consumption
Approx. 17 watts
Operation temperature
41°F-104°F (5°C-40°C)
Operation humidity
10%-75%
Weight
2.8 Kg (net)
Dimensions (WxHxD)
360 x 94 x 240 mm
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
EASY OPERATION
option.
3
Press the OK button to select this option.
Result:
The
EASY OPERATION
menu is displayed.
4
Press the corresponding
"
or
❷
buttons, until the
AUTO POWER OFF
option is selected.
5
Press the
❿
button, until you select the time of Auto Power off
interval.
OFF 2HOUR 3HOUR
6
On completion, press MENU twice to exit the menu.
Auto Power Off
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
"
,
❷
or
➛
,
❿
buttons to select the
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
"
or
❷
buttons, until the
ECO. MODE
is selected.
5
Press the
❿!
button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the VCR STANDBY/ON
button again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
ECO Mode-Reducing Standby power consumption
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
NO. OF
INTERVAL REPEAT : 5
"
❷
❿
END:
MENU
BONUS
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
"
❷
❿
END:
MENU
EASY OPERATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
BONUS
"
❷!!
➛❿!!
OK
END:
MENU
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
OPTIONS
"
❷!!
➛❿!!
OK
END:
MENU
