Samsung SV-DVD30, Инструкция по эксплуатации

Страница: 22 / 38

Using the Tape Counter Searching for a Specific Sequence
42 43
GB GB
VCR
2
2
INTRO SCAN :
INDEX SEARCH : - 6
VCR
The tape counter:
◆
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆
Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape counter to
zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press
➛➛
or
❿❿
.
➢
Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page
29).
Press INFO.:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆
Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
0:00:00
2
Intro Scan
1
After pressing the SEARCH, press the corresponding or
❷
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3
Press the
➛➛
or
❿❿
buttons depending on the direction
where your desired programme is located.
4 When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5 If you want to watch the tape from a particular Index, simply
press
❿
II.
I
ndex Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
1
After pressing the SEARCH, press the corresponding or
❷
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 Press the ➛➛
or
❿❿
buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press
❿❿
) or
backwards: (press
➛➛
). (
➛➛
-20
● ●
0
● ●
+20
❿❿✌
5
To cancel an Index search simply press the
❿
II or
■ button.
00169C SV-DVD30/XEU-GB2 7/3/03 11:24 AM Page 42