GB
25
Using the VI Feature
★
(SV-645B/SV-643B Only)
Before presetting your VCR:
◆
Switch on both the television and your VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result:
The
TIMER METHOD
is displayed.
2
Press the corresponding
"
or
❷
buttons, until the
VIDEOPLUS
option is selected.
3
Press the
❿!
button to select
VIDEOPLUS
.
Result:
A message is displayed to allow you to enter the
VI code.
☛
If all six programmes have been set, the message
TIMER
IS FULL
is displayed. Refer to page 28 if you wish to
cancel a preset recording.
4
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the VI code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
5
Press the MENU button.
Result:
The information concerning the programme is displayed.
☛
When using the VI function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
"
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the MENU button.
7
Press the STANDBY/ON button to activate the timer.
8
Refer to page 28 if you wish to:
◆
Check that your VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
VI code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the VI code for the programme
you wish to record.
™ VI is a trademark of Gemstar Development Corporation. The VI
system is manufactured under licence from Gemstar Development Corporation.
SPEED DUB TV/VCR TIMER
1
VIDEOPLUS
CODE ---------
CODE:
0-9
CORRECT:
➛
END:
MENU
** TIMER METHOD **
STANDARD
VIDEOPLUS
"
❷
❿
END:
MENU
STANDBY/ON EJECT
SLOW
SHUTTLE
PROG
1/JAN MON 21:28
PR DAY START
→
STOP
V/P
1 MO 1 12:00
→
12:50SP ON
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
-- ---- --:--
→
--:----
-
"
❷
➛❿
DELETE:
CLR/RST
MENU
7
