Valentine_308
Audio Troubleshooting FAQ’s.
3.
Turn on the audio amplifier with the “Standby/On” switch located on the left side of
the unit.
NOTE:
Make sure the RED light over the “Standby” switch is not lit. If it is, push the
“Standby” button one time. The Orange power light should activate. If it doesn’t, try pushing the
“Power” button one time.
4.
PC Audio troubleshooting tip:
When using PC audio, make sure that you have set the necessary
internal volume controls for the PC. This may require setting volume levels with hardware (keystrokes
or thumbwheels), or through software (Start/Settings/Control Panel/Multimedia).
5.
Turn the “Input” knob until the orange indicator is located beneath the desired source.
Input Signal
Source
A VCR
Adjust volume levels of
VCR
programs
A DVD
Adjust volume level of
DVD
programs
B Not
used
C CD/Cassette
Adjust volume levels for the
CD/Cassette deck
D Desktop
PC
Adjust volume levels for the
PC
(Web, Powerpoint, CD,
DVD) materials
E Not
used
6.
Verify that the “Pure Direct” and CD/DVD Direct Amp” lights are not lit. If they are,
press them one time to deactivate.
9 of 9
9/2/03
2:44 PM
