ENG-16
Recording a Programme with
Automatic Stop
BThis function enables you to record up to nine
hours of programmes. (LP)
Your VCR stops automatically after the
requested length of time.
1 Switch on the television.
2 To monitor the programme being recorded, select
the television channel reserved for use with your
VCR (or the AV input if used)
3 Insert the cassette on which the programme is to
be recorded, with the window visible and the
safety tab intact or the opening covered with
adhesive tape.
Result: The VCR is switched on automatically.
4 Select:
◆
The station to be recorded using the
PROG/TRK (
or
❷
) / PROG (
or
❷
)
buttons
or
◆
The AV1, AV2 or AUX
★
(SV-675F/SV-671F
only) source using the INPUT button for a
satellite tuner or external video source
Result: The channel number is displayed and the
programme can be seen on the television.
★
With SV-675F/SV-671F/SV-471F, you can
select the recording speed (SP/LP). Press the
SPEED button.
5 Hold the REC button down for a while to start
recording.
Result: The record indicator appears on the
television screen and VCR display. An index
is recorded on the tape (see page 25).
6 Press the REC button several times to increase
the recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television
displays. The selected programme is
recorded for the length of time requested.
At the end of that time, the VCR stops
recording automatically.
7 If you wish to cancel the recording before the end,
press VCR STANDBY/ON (STANDBY/ON).
☛
If the end of the tape is reached while recording:
◆
The recording stops
◆
The VCR automatically turns off
Using the ShowView Feature
★
( SV-675F/SV-275F Only)
Before presetting your VCR:
◆
Switch on both the television and your VCR
◆
Check that the date and time are correct
◆
Insert the cassette on which the programme
is to be recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the TIMER button.
Result: The
TIMER METHOD
is displayed.
2
Press the corresponding
or
❷
buttons, until
the
SHOWVIEW
option is selected.
3
Press the
❿
button to select
SHOWVIEW
.
Result: A message is displayed to allow you to
enter the ShowView code.
☛
If all six programmes have been set, the
message
TIMER IS FULL
is displayed.
Refer to page 16 if you wish to cancel a
preset recording.
4
Press the numeric buttons to enter the code
opposite the programme that you wish to record
in your television magazine.
➢
If you wish to correct the ShowView code that
you are entering:
◆
Press the
➛
button until the digit to be
corrected is cleared
◆
Enter the correct digit
5
Press the MENU button.
Result: The information concerning the
programme is displayed.
☛
When using the ShowView function for the
first time with stored stations, the programme
number flashes. This one time, you must
enter the station number manually by
pressing the
or
❷
buttons. Refer to the
following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
6
If the programme and times are correct, press the
MENU button.
7
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: The Record indicator (
) is displayed.
V
IPC
+
NICAM
02119C SV-675F/XEB-ENG 3/15/04 10:46 AM Page 16
