Samsung SU8583 Скачать руководство пользователя страница 2

Important Safety Instructions

Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic
precautions should always be followed, including the following:

PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER

.

WARNING:

To reduce the risk of fire, electric shock, or injury:

• Do not leave vacuum cleaner unattended when it is plugged in. 
• Unplug from outlet when not in use and before servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow children to operate vacuum cleaner or use as a toy.
• Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. 
• If vacuum cleaner is not working as it should, or has been dropped, damaged, left outdoors or dropped

in water, take it to a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull the cord around sharp

edges or corners. Keep cord away from heated surface.

• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not handle vacuum cleaner or plug with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep openings free of dust,

lint, hair and anything that may reduce air flow.

• Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes.
• Do not use without dirt cup or filters in place. Empty cup and clean filter frequently when picking up very 

fine materials such as powder.

• Turn off all controls before unplugging vacuum cleaner.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible materials such as gasoline or fine wood standings or

use in areas where they may be present.

• Store your vacuum cleaner indoors in a cool, dry area.
• Avoid picking up hard, sharp objects with the cleaner, they may damage the cleaner.
• Always turn off this appliance before connecting or disconnecting the hose,  removing the bottom plate

for maintenance.

• Use only on dry, indoor surfaces, never change the plug in any way.
• Do not modify the polarized plug to fit a non-polarized outlet or extension cord.
• Do not touch the brush roller when it is rotating.
• Keep suction away from your face when using nozzles and pipe.
• Do not pull the power cord around sharp corners and do not allow it to become trapped.
• Unplug before connecting turbine nozzle.(only using turbine-brush model)

SAVE THESE INSTRUCTIONS FOR FUTURE USE.
THIS VACUUM CLEANER HAS A POLARIZED PLUG.

To reduce the risk of electrical shock, this appliance has a polarized plug (one blade wider than the 
other.) This plug will fit in a polarized outlet only one way. If the plug does not fit  fully in the outlet, reverse
the plug.  If it still does not fit, contact a qualified electrician to install a proper outlet.

2

Содержание SU8583
















Отзывы: