background image

operating the cleaner 

_9

02 
O

p

ERA
TING

 THE
 c

LEANER

SpEcIAL ON-BOARD TOOLS

Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile

above floor vacuum cleaner when you select one of the special tools. 

1.  Raise Handle to Upright Position.

2.   Grasp the end of the Hose Wand and lift Hose Wand to separate from the 

  Hose Wand Base.

3.  Attach tools by firmly pushing onto 

Vacuum Hose or Extension Wand.

combination Dusting Brush/

Upholstery Tool: 

Two Types of cleaning tools are 

included in one attachment : rotate 

for desired tool.

•  Use Brush side to dust furniture, blinds, 

books, lamps, shelves, and baseboards.

•  Use Upholstery side for curtains, 

draperies, cushions, fabrics.

crevice Tool:

Use in tight narrow spaces.

Extension Wand:

Use with desired attachment for a 

longer reach.

Mini Turbo Brush (Select Models):

Use rotating brush action for small areas such as stairs and upholstery.

Note

 :  

Press gently when using Mini Turbo Brush to gain maximum cleaning. Too 

much pressure could cause the brush to stop rotating.

pOWER cORD STORAGE

1.  To use your vacuum, remove the cord and plug it into an electrical outlet. For 

your convenience, there is a quick release cord wrap for easy cord removal.

2. When you are finished cleaning, turn vacuum cleaner off.

3.  Unplug power cord by grasping the polarized plug (NOT the cord) and 

disconnect from outlet.

4. Loop power cord around cord wraps on the back of the vacuum as shown.

5. Clip molded plug to power cord to secure.

*option

Select Models Only

Combination

Dusting Brush/

Upholstery Tool

Crevice 

Tool

Extension 

Wand

Hose Wand

Hose Wand 

Base

Quick 

Release Cord 

Wrap

Power Cord

Operating the cleaner

Содержание SU3364

















Отзывы: