Samsung ST55W3PCX/XAX Скачать руководство пользователя страница 26

Страница: 26 / 103

Alignment and Adjustments

4-12

Samsung Electronics

4-4 Other Adjustments

4-4-1 Screen Adjustment

1. Warm up the TV for at least 30 minutes.

2. Select the “ STANDARD” Video mode.

3. Turn to the Video Mode (No Signal) using a

remote-control.

4. Connect an oscilloscope to RK,GK,BK.

5. Adjust the VR (VR501, VR531, VR561) screen

so that RK, GK, BK pulse is 20Vp-p each.
(Turn the R,G,B VR screen fully
counterclockwise in the area of each flyback
line.)

4-4-2 White Balance Adjustment

1. Select the “STANDARD” video mode.

2. Input 100% white pattern.

3. In the stand-by mode, press the remote-control

keys in the following sequence:

4. Warm up the TV for at least 30 minutes.

5. Input a 10-step signal.

6. R-cut off, B-cut off, and G-cut off by pressing

the Volume keys.

7. Adjust the low light with viewing the dark

side of the screen.

8. Select R-drive, G-drive, and B-drive by

pressing the Volume keys.

9. Adjust the high light with viewing the light

side of the screen.

10. If necessary, redo adjustments 6~9.

11. Press the Menu key to exit.

4-4-3 Sub-Brightness Adjustment

1. Input a sub-brightness adjustment signal.

(TOSHIBA PATTERN)

2. In the stand-by mode, press the remote-control

keys in the following sequence :

3. Select SBT by pressing the Volume keys.

4. Adjust so that the 63 step on the right side of

the screen is not seen (Use the Volume
keys).

5. Press the Menu key to exit.

4-4-4 High Voltage (29KV) Check

PRECAUTION

1. Input a lion head pattern.

2. Select “STANDARD” video mode.

3. Warm up the TV for at least 10 minutes.

4. Use a 1000:1 probe.

ADJUSTMENT

1. Connect the (+) terminal of the 1000:1 probe to

the high voltage distributor and the (-)
terminal to GND (located on the deflection
board).

2. Adjust RR471S (located on the deflection

board) so that the digital meter indicates
DC 29V

0.1V.

4-4-5 F.S. (Fail Safe) Adjustment

Note : The finished product has a well-mounted

VR (RR402S).
If necessary, do the F.S. adjustments in the
following sequence.

1. Use a digital multimeter.

2. Connect the digital multimeter to the JIG pin

(DZ482S) terminals

3. Adjust VR (RR402S) so that the voltage

becomes 2.25V.

4. After the adjustments are complete, be sure to

mount VR (RR402S) correctly.

Содержание ST55W3PCX/XAX








































































































Результаты поиска

Содержание ST55W3PCX/XAX

Отзывы:

Похожие инструкции для ST55W3PCX/XAX

Бренды по названию

Популярные бренды

Samsung ST55W3PCX/XAX, Руководство по обслуживанию

Результаты поиска

Содержание ST55W3PCX/XAX

Отзывы:

Похожие инструкции для ST55W3PCX/XAX

Бренды по названию

Популярные бренды