08_
setting up
08_
setting up
Be careful not to miss the parts of refrigerator.
3. Next, remove the door from the lower hinge
6
by
carefully lifting the door straight up
7
.
Be careful not to pinch the water tubing and
wire harness on the door.
4. Remove the lower hinge
8
from the bracket
9
by gently lifting the lower hinge upwards.
2. Insert the 2 clips in the install pack and check that
each clip holds the line firmly.
Do not cut the water line. Gently separate it
from the coupler.
Removing the freezer door
A few things to mention fi rst.
•
Make sure that you lift the door straight up so the
hinges are not bent or broken.
•
Be careful not to pinch the water tubing and wire
harness on the door.
•
Place doors on a protected surface to prevent
scratching or damage.
1. With the Freezer door closed, remove the upper
hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
2. Remove hinge screws
3
and the ground screw
4
by turning counter-clockwise, and take off the
upper hinge
5
. Be careful that the door does not
fall on you as you are removing it.
1
2
- on some models
- on some models
5
4
3
6
7
9
8
clip A (1/4”)
clip A (1/4”)
(6.35mm)
(6.35mm)
DA99-01745A-27.indd 08
DA99-01745A-27.indd 08
14. 7. 17.
11:35
14. 7. 17.
11:35
