English
_97
●
m
enu Se
Tup
neTworK ConfigurATion
It provides networked monitoring of Live screen from a remote place, and supports mail forwarding function with
events. You can configure the network environment which enables such functions.
interface
You can set the network connection route and protocol.
Setting a network connection
Sets the protocol and environment of the network.
[
menu
]
[
enTer
]
▼
<
menu
>
[
enTer
]
▼
<
network
>
►
<
interface
>
[
enTer
]
▼
<
network
>
▲▼◄►
[
enTer
]
•
Network1 (Camera) : Port for camera connections; it receives video from a camera.
•
Network2 (Viewer) : Port used to send video to the web viewer.
•
Network1 (Camera) / Network2 (Viewer) setup
- IP Type : Select a network connection type.
- IP Address, Subnet Mask, Gateway, DNS
<
Static
> : You can manually enter IP address, subnet mask, gateway and DNS.
<
dhCp
> : IP address, subnet mask and gateway values will be automatically set.
<
pppoe
> : IP address, subnet mask and gateway values will be automatically set.
- User ID, Password : If you set the connection mode to PPPoE, you need to enter "
user id
" and
"
password
" to register in PPPoE.
•
Transfer bandwidth : Enter the maximum amount of upload data bandwidth.
Check the assigned setting in Connection Mode before entering your value.
`
If the sum of the network TX/RX is less than 160Mbps, there is a max transmission rate of 160Mbps.
•
Default Gateway : Set the basic gateway by using Network1 / Network2 setup.
M
`
You can manually input DNS of <
DHCP
> and <
PPPoE
> when it selected to <
Manual
>.
