Samsung SRD-830D, Руководство пользователя

Страница: 62 / 134

62_ using the DVR
using the DVR
•
IP, Gateway, Subnet Mask, and DNS
- For < Static IP > : You can directly input IP address,
Gateway, Subnet Mask and DNS.
- For < Dynamic IP > : IP address, Gateway, and Subnet
Mask are set automatically.
- For < ADSL > : IP address, Gateway, and Subnet Mask
are set automatically.
•
User ID, Password : In case you selected ADSL, provide the
“
User ID ” and its “ Password ”.
M 
DNS server for < Dynamic IP > and < ADSL > can be set by user only if you selected < Manual >.
6. When the connection setup is done, press < OK >.
Setting the Protocol
1. Use the up/down buttons ( ) in < Network > window to
move to < Connection Mode >, and press [ ENTER ]
button.
2. Select < Protocol >.
3. Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
•
Protocol Type : Select the protocol type between TCP and
UDP.

If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/
Multicast are activated.

If setting the connection mode to ADSL, you cannot select UDP for the protocol type.
•
Port (TCP) : Initially, < 554~558 > is set. It increases / decreases by 5.
- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
•
Port (UDP) : Initially, < 8000~8160 > is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area
network (LAN) environments.
•
Unicast/Multicast : Select one between Unicast and Multicast.
If selected Multicast, Multicast IP and TTL are activated.
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the
network.
•
Multicast IP : User can directly input.
•
TTL : Select from 0 ~ 255. Initial value for the TTL is set to < 5 >.
•
Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to < 80 >.
4. When the protocol setup is done, press < OK >.
Connection Mode
Connection
Protocol

Connection Mode ADSL

Bandwidth 600kbps
OK Cancel

IP 192.168. 1.200

Gateway 192.168. 1. 1

Subnet Mask 255.255.255. 0

DNS Manual 168.126. 63. 1

User ID ID

Password
************
Connection Mode
Protocol
Connection
 Protocol Type TCP

Port(TCP) 554 ~ 558

Port(UDP) 8000 ~ 8160

Unicast/Multicast Unicast

Multicast IP 224.126. 63. 1

TTL 5

Webviewer Port 80
OK Cancel