English
_59
USING THE DVR
SETTING THE EVENT
You can set recording options for sensor, motion, and video loss event.
Sensor Detection
You can set the sensor’s operating condition and connected camera, as well as alarm output and its
duration.
Using the mouse may help make setup easier.
1.
Press the [
MENU
] button on the remote control or front
panel.
2.
Use the left/right button (
◄ ►
) to select <
Event
>.
Event setting menu is selected.
3.
Use the up/down buttons (
) to move to <
Sensor
Detection
>, and press [
ENTER
] button.
A window of sensor detection setup appears.
4.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
•
Sensor Operation : Sets the operation mode of sensors.
- <
OFF
> : Sensor does not operate.
- <
N.O (Normal Open)
> : Sensor is opened.
If the sensor is closed, it generates alarm.
- <
N.C (Normal Close)
> : Sensor is closed.
If the sensor is open by interruption, it generates alarm.
•
Cam : Select a channel to be connected to the sensor.
If selected camera, “
Cam Preset setup
” window appears.
Select a channel and setup the preset.
Preset setup can be done in PTZ mode.
Refer to “
Preset Setting
”. (page 73)
•
Alarm : Sets the alarm output method.
For further information on alarm output, refer to “
HDD Alarm
>
Alarm
”. (Page 51)
•
Duration : Sets the duration of alarm signal and alarm
sound.
5.
When the sensor detection setup is done, press <
OK
>.
Event
Logout
Exit
Sensor Detection
Motion Detection
Video Loss Detection
Alarm Schedule
Sensor Detection
OK
Cancel
Previous/Next Page
Sensor Sensor
Operation
Cam
Alarm
Duration
1
OFF
1
None
10
sec
2
OFF
2
None
10
sec
3
OFF
3
None
10
sec
4
OFF
4
None
10
sec
5
OFF
5
None
10
sec
6
OFF
6
None
10
sec
7
OFF
7
None
10
sec
8
OFF
8
None
10
sec
Sensor Detection
OK
Cancel
Previous/Next Page
Sensor Sensor
Operation
Cam
Alarm
Duration
1
OFF
1
None
10
sec
2
OFF
2
None
10
sec
3
OFF
3
None
10
sec
4
OFF
4
None
10
sec
5
OFF
5
None
10
sec
6
OFF
6
None
10
sec
7
OFF
7
None
10
sec
8
OFF
8
None
10
sec
Cam Preset setup
OK
Cancel
CH
Preset
1
None
2
None
3
None
4
None
5
None
6
None
7
None
8
None
CH
Preset
9
None
10
None
11
None
12
None
13
None
14
None
15
None
16
None
Sensor Detection
OK
Cancel
Previous/Next Page
Sensor Sensor
Operation
Cam
Alarm
Duration
1
OFF
1
None
10
sec
2
OFF
2
None
10
sec
3
OFF
3
None
10
sec
4
OFF
4
None
10
sec
5
OFF
5
None
10
sec
6
OFF
6
None
10
sec
7
OFF
7
None
10
sec
8
OFF
8
None
10
sec
Alarm Setup
OK
Cancel
1 2 3
4
BEEP
All
