English
_23
CONNECTING WITH OTHER DEVICE
CONNECTING EXTERNAL SATA HDD (eSATA)
M
The external SATA connection port is not available in SRD-830/830D/830DC/1610/1610D/1610DC/1630/1630D/1630DC.
1.
Two external SATA ports are provided on the rear panel by factory default.
2.
If connected to the system, the external SATA HDD (eSATA) can be recognized and configured in “
Menu >
Device > Storage Device
”.
J
Only one SATA HDD can be connected to an external SATA port.
Use a cable shorter than 1 m for the external external SATA HDD (eSATA) connections.
Unexpected disconnection to a device in use which is connected via eSATA may restart the system. Check whether the
device is in use before disconnecting it.
CONNECTING POS DEVICE
1.
You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
2.
Connection setup for the RS-232C port is available in “
Menu > Device > POS Devices
”, press the
<
POS Device Setup
> button and set <
Baudrate, Parity, Data, Stop bit and Transfer Type
>. (Page 52)
CONNECTING THE ALARM INPUT/OUTPUT
The Alarm In/Out port at the back is composed of the following.
1.
Alarm In Port for SRD-830/830D/830DC/850/850D/850DC/
870/870D/870DC
2.
Alarm In Port for SRD-1610/1610D/1610DC/1630/1630D/1630DC/
1650/1650D/1650DC/1670/1670D/1670DC
3.
Alarm Out Port
ALARM IN
NO CONNECTION
ALARM IN
ALARM OUT