background image

36_

 

DVR setup

DVR setup

NETWORK

You can configure the settings of IP SETUP, DDNS and E-MAIL.
See the previous section to repeat steps 1~3. (Page 23)

IP SETUP

You can specify the IP of the DVR according to the network connection.

Using the mouse may help easy setup.

Use the direction buttons to move to the upper 
<

NETWORK

> icon and press the [

ENTER

] button.

The IP Setup screen appears.

Use direction buttons (▲▼◄►) to move to a desired 
item, and press the [

ENTER

] button to set the value.

DHCP: Set the IP address of the DVR to a dynamic IP.

If <

DHCP

> is selected, the setting values of IP ADDRESS, 

GATEWAY, SUBNET MASK, 1st DNS SERVER and 2nd 
DNS SERVER will be automatically filled.

If <

DHCP

> is not selected, you should manually enter 

the setting values of IP ADDRESS, GATEWAY, 
SUBNET MASK, 1st DNS SERVER and 2nd DNS 
SERVER.

For the IP address, contact the network administrator.

IP ADDRESS: Enter an IP address.

GATEWAY: Enter a gateway address.

SUBNET MASK: Enter a subnet mask address.

1st DNS SERVER: Enter the first DNS server address.

2nd DNS SERVER: Enter the second DNS server address.

RTSP SERVICE PORT: Indicates a port used when the remote management software program 
accesses the DVR.

WEB SERVER PORT: Indicates a port used to connect to the DVR using the web browser.

AUTO PORT: Registers connectable address from outside to DDNS HOST NAME automatically.

DELETE PORT: Unblock registered port forwarding status.

PORT TEST: Check the current RTSP PORT, HTTP PORT status by itself whether it is connectable.

DDNS HOST NAME: Displays the MAC address of the DVR that connects to the DDNS.

MAX TX SPEED: Set the network transfer speed.
Select one from 56, 128, 256, 512, 1024, 2048, 4096, 8192KBYTE.
The video will be transferred below the set speed, which may differ according to the network 
connection status.

When your settings are completed, press the <

APPLY

> button on the bottom.

Your settings will be applied.

Press the <

CLOSE

> button to display the confirmation dialog and return to the previous menu.

1.

2.

-

-











3.

4.

NETWORK

CANCEL

APPLY

CLOSE

NETWORK

DHCP

HELP

AUTO PORT

IP ADDRESS

GATEWAY

SUBNET MASK

1st DNS SERVER

2nd DNS SERVER

RTSP SERVICE PORT

DDNS HOST NAME

MAX TX SPEED

192.168.1.200

192.168.1.1

255.255.255.0

168.126.63.1

168.126.63.2

8192 KBYTE

554

8080

DELETE PORT

PORT TEST

AUTO PORT

DELETE PORT

WEB SERVER PORT

IP SETUP

DDNS

E-MAIL

http://ff00378.websamsung.net:8080 

Содержание SRD-450


























































































Отзывы: