134 Safety
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
•
Reorient / relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed
in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring and
calculation process. It does not represent how much RF the phone emits. All phone
models are tested at their highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than the level reported to
the FCC. This is because of a variety of factors including its proximity to a base
station antenna, phone design and other factors. What is important to remember is
that each phone meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a substantial
margin of safety. As stated above, variations in SAR values between different
model phones do not mean variations in safety. SAR values at or below the federal
standard of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the
SPH-m510
are:
CDMA mode (Part 22) - Head: 0.732 W/kg; Body-worn: 0.664 W/kg
PCS mode (Part 24) - Head: 1.26 W/kg; Body-worn: 0.423 W/kg
Owner’s Record
The model number, regulatory number and serial number are located on a
nameplate inside the battery compartment. Record the serial number in the space
provided below. This will be helpful if you need to contact us about your phone in
the future.
Model:
SPH-m510
Serial No.: