Speakerphone
Use the
Speakerphone
setting to conduct a call
without holding the phone to your ear (and allow
others to participate in your phone call).
Don’t hold the phone up to your ear
when it’s in Speakerphone mode.
The volume will be too loud and may
harm your ear.
You must be on a call to use this
setting.
Using the Speakerphone:
1.
When you have made or answered a call, you
will see a "
Connected to…
” message on the
screen, as shown.
2.
Press the Volume button
Up
repeatedly until you
see
"Press Yes for SPKR Phone,"
as shown.
3.
Press the
button.
Exiting Speakerphone Mode:
While you’re on a call, press the volume button
Down
to turn this feature off.
Your phone automatically exits the
Speakerphone
setting when you end a call.
NOTE
ALERT
NOTE
Adjusting the ringer volume
1.
Open your phone and confirm it’s turned on.
2.
Press the
Up/Down
volume button on the
outside of the phone below the display window.
Each press will cycle through the below options.
•
Ringer Volume Ring Max
•
Ringer Volume High
•
Ringer Volume Med
•
Ringer Volume Low
•
Ringer Volume Silent
The ringer and keypad can be silenced
by pressing the volume button
Down
until
“Silent”
appears on the screen.
Your Jitterbug will now only vibrate to alert you
to incoming calls (This can come in handy at a
movie, a library or any other location where a
ringer may be a distraction.)
Adjusting
the ear piece volume
When you’re on a call, press the Volume button
up or down until the sound reaches
a comfortable volume.
TIP