Samsung SP43Q5HL1 Series, Руководство по обслуживанию

Страница: 26 / 77

Alignment & Adjustment
2-22 Samsung Electronics
2-7-2 Convergence Data
Caution : <Cautions regarding Automatic Color Adjustment>
①
This model employs the Automatic Color Adjustment function to prevent distortion of the Convergence by the earth
’
s
magnetic field. For it to function properly, the Convergence should be precisely adjusted.
②
The Screen Jig should be used for precise adjustment, so it does not escape the sensor
’
s detection area.
Sensors are on the center of each of the 4 faces.
③
Adjustment should be precise, otherwise an Automatic Color Adjustment error occurs.
1. Aging the TV over 30 minutes is required.
2. Apply the NTSC input signal from the antenna or other external input source.
Caution : Before adjusting the Green, Red and Blue patterns, adjust the DY of the CRT to avoid having a tilted center
line.
3. Press Mute, 1, 8, and 3 (on the remote control) sequentially to enter Convergence Mode. The Test Pattern is displayed..
Caution : If an OSD (On-Screen Display) appears during the process, press the "S-MODE" key to exit Convergence
mode and then re-enter Convergence mode.
4. Press R-MUTE "+100" key and B-MUTE "PRE-CH" key to mute out Red and Blue. Press G-SELECT "8" key to adjust the
Green Color Convergence first. (For the first entrance, Green Color Convergence will automatically be selected.)
5. Press the "MUTE" key to move the cursor right, the "P.MODE" button to move the cursor left.