Samsung Sound+ SWA-9000S, Руководство пользователя

Страница: 7 / 206

ENG - 6 ENG - 7
Accessories
STANDBY
LINK
WIRELES
S
Surround
Speaker (2EA)
Speaker Cable
(2EA)
Power Cord Wireless Dongle
(WHM520V)
Wireless
Receiver
Module
Screw (2EA) Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type
/ One Mount Type)
Toroidal Ferrite Core
• The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 12. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specifications
Weight
Wireless Receiver Module 0.7 kg
Surround Speaker 0.6 kg
Dimensions (W x H x D)
Wireless Receiver Module 50.0 X 201.3 X 132.0 mm
Surround Speaker 87.5 X 147.0 X 87.5 mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10% ~ 75%
Frequency range 20Hz~20KHz
Overall Standby Power Consumption (W) 1.0W
NOTES
– Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
– Weight and dimensions are approximate.
– For more information about the power supply and power consumption, refer to the label attached
to the product.
– Design and specifications are subject to change without prior notice.
Open Source Licence Notice
• To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
Important Note About Service
• An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
• You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-9000S to a Soundbar
1. Connect the Wireless Receiver Module to 2 Surround Speakers
Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver
Module.
• The speaker cables are colour coded.
SURROUND-LEFT
ID SET
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
POWER
ID SET
L R
SURROUND SPEAKERS OUT
SPEAKER IMPEDANCE : 3Ω
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
• When connecting the speaker cables to the Wireless Receiver Module, follow these steps:
1. Insert the grey plug into the grey jack on the Wireless Receiver.
2. Insert the blue plug into the blue jack on the Wireless Receiver.