manualshive.com logo in svg

Samsung SNP-6321, Руководство пользователя

Поделиться
Скачать
Samsung SNP-6321 Скачать руководство пользователя страница 133

upgrade / reboot

1. 

From the Setup menu, select the 

<

System (   )

> tab.

2. 

Click <

upgrade / reboot

>.

3. 

Select a desired item and set it  

appropriately.

 

•

Upgrade : Performs upgrading the 

system.

 

•

Factory default : Resets the system 

to the factory default.

 - Except network parameter & Open 

SDK : Initialize all except for the network setting and lens settings as well as the 

open SDK installation files and internal settings.

 - All : Resets all settings including the camera settings. (however, the log 

information will not be reset)

 

`

The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is 

found, the previous settings will be restored automatically.

 

•

Configuration backup & Restore : Backs up the current system settings before 

performing the restoration process. The system is automatically restarts after 

backup or restoration.

 

•

Restart : Restarts the system.

English 

_133

●

  

Setup 

Screen

Содержание SNP-6321

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды