Samsung SNF-7010, Руководство пользователя

Страница: 87 / 130

audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < event setup >.
3. Select < audio detection > from < event
action setup >.
4. Set whether or not to < enable >.
5. Set the audio detection’s sound level.
The lower the level, the smaller the
sound change is detected.
6. Specify the activation time and activation
condition.
`
For more information about < Activation
time
> and <
Action
>, refer to “
Tampering
detection ”. (page 82)
7. When done, click [ apply ( ) ].
M
`
Select < Video & Audio > - < Audio setup > and set the proper volume for your MIC as an audio
input source, so that the audio detection function can work properly.
`
If detected audio level is too low, set the audio input gain to a higher level in < Audio setup >.
`
Please use the audio detection function when connecting to an external audio input device.
network disconnection
You can receive and save events of a physically disconnected network.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < event setup >.
3. Select < network disconnection > from
< event action setup >.
4. Set whether or not to < enable >.
5. Specify the activation time and
activation condition.
`
For more information about < Activation
time > and < Action >, refer to “
Tampering
detection
”. (page 82)
6. When done, click [ apply ( ) ].
English _87
●
Setup
Screen