Samsung SMT-S7800, Руководство пользователя

Страница: 16 / 87

14
_
©
SAMSUNG Electronics Co., Ltd.
INSTALLATION
This section describes how to install the STB (SMT-S7800).
Installation Environment
The table below shows the installation environment for the STB.
Item Description
Operating Temperature 0-40°C
Operating Humidity 20–80% (40°C)
Rated Voltage, Frequency AC 230 V +/- 15%, 50 Hz
Rated Power Consumption Max. 40 W
Broadcasting Rx Frequency 950 ~ 2150 MHz channel 8Mhz
When Using and Installing the Product:
The product must be used under the specified environment. Otherwise, it may
damage or shorten the life of the product.
When Connecting an STB to Peripherals
- Ask a service technician to check if the TV or VCR power supply where an STB
will be connected is properly grounded.
If not, there is a risk of fire.
- If excessive heat is produced from cables after connecting the video/audio
cables, contact your service centre. It may cause a fire.
If the STB is stored at a low temperature, HDD-related functions might not work
properly. This is not a malfunction. You need to boot the system at room
temperature, wait about half an hour, and then reboot it again.