SMH1713
2/17/2012
3
CN02 Pwr & Relay
1-NC
3-NC
5-(CN201-1) Vent High
7-(CN201-1) Vent Low
9-NC
11-(CN201-1) In rush
Main PCB
CN201 Power
1-Line 1
3-Main. Lamp, fan
5-Cooktop lamp
7-Turntable
RY204
Main
Relay
RY205
Night
Relay
RY206
Bright
Relay
Door Interlock
CN401
Door Connector
1 Door switch
3 12vdc
5 Hood TCO 5vdc
2 & 4 DC Common
The fuse is located on the noise filter.
1. Disconnect power and remove grille and Assembly Control Box.
2.
Replace the fuse.
3.
When 20A fuse blows out by the operation of interlock monitor
switch failure, replace the primary interlock switch, secondary inter-
lock switch, door sensing switch, interlock monitor switch and power
relay.
4.
When the above four switches operate properly, check if any
other part such as the control circuit board, blower motor or high
CN701
Membrane Sw
RY210
Vent
High
RY207
Turntable
RY202
Power Low
CN301
Gas Sensor
RY211
Vent
Low
RY201
In Rush
Microwave cover assembly
The front of the top cover has flanges that must fit inside the front frame and vent, and the bottom goes above the bot-
tom cover. Start with the left side and hold in place with one screw once engaged. Leave the display loose so you can
see that the right side is engaged properly. Then mount display and the vent, ensuring the vent engages the flange.
RY202
Power High
Содержание SMH1713
Страница 2: ...SMH1713 2 17 2012 2 Insert PDF...
