background image

Installation Instructions

2

CONTENTS

General information

Important Safety Instructions .....................3

Electrical Requirements ..............................3

Hood Exhaust ...........................................4, 5

Damage – Shipment/Installation .................6

Parts Included...............................................6

Tools You Will Need .....................................7

Mounting Space............................................7

Step-by-step installation guide 

Placement of Mounting Plate ................8–10

Removing the Mounting Plate ................... 8

Finding the Wall Studs .............................. 8

Determining Wall Plate Location ............... 9

Aligning the Wall Plate ............................ 10

Ventilation Types..................................11–14

A

  Outside Top Exhaust .................................... 12

Installation Procedure For Exhaust Adaptor 
and Proper Damper Operation Check..... 12

Adjust Exhaust Adaptor........................... 12

B

  Recirculating ................................................. 13

Adapting Microwave Blower
for Recirculation ...................................... 13

Installing the Charcoal Filter.................... 13

C

  Outside Back Exhaust................................... 14

Adapting Microwave Blower
for Outside Back Exhaust

........................ 14

Installation ............................................ 15-17

Preparing the Rear Wall for Outside Back 
Exhaust ................................................... 15

Attach the Mounting Plate

to the Wall ......................................... 15, 16

Use Top Cabinet Template for 

Preparation of Top Cabinet ..................... 16

Mount the Microwave Oven............... 16, 17

Connecting Ductwork for outside Top 
Exhaust ................................................... 17

Before You Use Your Microwave ..............18

Содержание SMH1711S





















Отзывы: