22
How to Set up Infrared Ray Sensor
Infrared ray sensor detects movement on the inside with an infrared ray when the door
opens by pressing [Open/Close] button. It prevents the door being opened by
abnormal methods. You can either set up or cancel the function for your convenience.
(When purchased, this function is not activated.)
After pressing button [1] or [3], pressing
[
¹
] will turn on or off the infrared ray
sensor function.
Press [Register] button on the inner
body briefly.
Ding
dong
- With the sensor being setup, press Open/Close button and check if the infrared sensor
works properly by checking the Infrared ray sensor LED lights up on the inner body.
- With the infrared ray sensor being setup, the door will not open unless the sensor detects
any movement inside.
- The sensor
’
s infrared detection works at the height of the infrared ray sensor LED light, and it
may not work properly when a small child tries to open the door. Be sure you set up the
function with that in mind.
- This function may differ depending on the differences in installation environments.
- Setup of infrared ray sensor function only works when the door is open.
- When purchased, this function is not activated.
Ding dong
dang
Sensor Setup
[1] button:
Infrared ray sensor on
[3] button:
Infrared ray sensor off
Sensor Mechanism
Infrared ray sensor detects movement on the
inside when the door opens by pressing
Open/Close button on the inner body, and
the door opens.
If an abnormal method is used from the
outside to open the door, the sensor does
not detect movement inside, and the door
will not open.
