Samsung SHR-5080, Руководство пользователя

Страница: 33 / 109

MENU
Cancel OK
Record Quality & Auto Deletion
Cam Normal Event Cam Normal Event
1 Level4 Level4 9 Level4 Level4
2 Level4 Level4 10 Level4 Level4
3 Level4 Level4 11 Level4 Level4
4 Level4 Level4 12 Level4 Level4
5 Level4 Level4 13 Level4 Level4
6 Level4 Level4 14 Level4 Level4
7 Level4 Level4 15 Level4 Level4
8 Level4 Level4 16 Level4 Level4
Off
Auto Deletion:
01 Day
MENU SETUP
System
Camera
Monitoring
Record Mode
Event Record
Schedule
Backup
Network
Record Quality & Auto Deletion
Record Rate & Video Size
Event Record Duration
Move/Control Select Exit
05 MENU SETUP
menu setup _
29

OSG Display
- Date: The date is displayed on the screen
when it is set to On .
- Time: The time is displayed on the screen
when it is set to On .
- Title: The camera name is displayed on the
screen when it is set to On .
- Status: Recording and event information,
Audio sign, and PTZ sign are displayed on
the screen when it is set to
On
.

Spot Out Channel
This is used to monitor a specific channel by
connecting a monitor to the SPOT jack on
the rear of the product. When you are using
two monitors, one monitor can be set for spot
out monitoring. This provides two kinds of
functions: Displaying the spot out channel only
and auto sequencing of all channels.
- Auto sequence setup ranges from Ch 1 to
Ch 16.
- In the auto sequence mode, channels are
changed in turn.
- Duration period for auto sequence is the
same as the one set in Camera Setup.

Spot Out Event Monitor
This is set for monitoring events from multiple
channels.
- Off: The event monitoring does not operate
in the Spot Out channel.
- 3sec, 5sec, 10sec, 20sec, and 30sec:
Sets the screen duration period in the Auto
Sequence mode.
- Continuous: Once the event monitoring
starts, the screen remains alive until you
press the ALARM button.

Monitor Out
Video output methods can be selected from
Composite, VGA, and Dual output modes.
System restarts after changing the Video
output methods.
- Composite video output: transfers the
composite output signal.
- VGA video output: transfers VGA output
signal.
- Dual video output: both the Composite and
VGA video outputs are available to use.

PB Channel Position
You can designate the playback (PB) channel
location in 9-split mode.
Right Down : The playback channel is
displayed at the lower right side of the screen.
Center : The playback channel is displayed in
the center of the screen.

Multi Channel Seq.
You can set the Auto Sequence interval for split
screens. Available intervals are 3, 5, 10, 20,
and 30 seconds.
CAUTION
[Video Out]
You may experience low display
quality while the dual video output is
in use. In this case, please switch it to
the composite or VGA video output.
VGA video output port is not available
while the composite video output is
set to use and vice versa.
If the MODE and ZOOM buttons
are pressed and hold for 5 seconds,
the system restarts while alarming
beep sound. The LED blinks while
restarting and the video output mode
is changed. (Composite output
VGA output).

VGA output: 640x480 (60Hz)
RECORD MODE
The detailed list for record mode settings is as
follows:
Record Quality & Auto Deletion
SHR-5162_Eng.indb 29 2007-8-2 14:47:36