manualshive.com logo in svg

Samsung SHR-3010P, Руководство пользователя, Страница: 26 / 45

Поделиться
Скачать
Samsung SHR-3010P Скачать руководство пользователя страница 26

3-24

GB

3-23

DIGITAL VIDEO RECORDER

GB

9

Communication Setup

The following illustrates the intial setting of the COMMUNICATION SETUP menu.

①

BAUD RATE

Sets data transmission rate in RS-232C communication.

[4,800/9,600/19,200/38,400/115,200]

②

NETWORK ACCESS/IP ADDRESS/GATEWAY/SUBNET MASK

If the system is connected to a LAN, it can be controlled from the remote surveillance pro-

gram installed on a remote PC. To connect to a LAN, set the NETWORK ACCESS to ON,

and configure the IP ADDRESS, GATEWAY, SUBNET MASK, etc. to suit the user’s net-

work environment. Then, connect the LAN Cable to the LAN Cable connection terminal on

the back of the system and reboot the system. If at least one from the IP ADDRESS,

GATEWAY, and SUBNET MASK is modified, the system must be rebooted to apply the

modified setting to the system.

➂

NETWORK USER ID/NETWORK USER PWD

In order to access the system through a LAN from a remote surveillance program installed
on a remote PC, the user ID and password must be entered. At this time, the user ID and
password entered match the ones set in the NETWORK USER ID and NETWORK USER
PWD, you can connect to the system; otherwise, you cannot gain access. Both are 4-digit
numbers and the initial set values are 0000.

➃

PAN/TILT TYPE (Remote Control of Camera)

You can control the Pan/Tilt/Zoom function of a camera with the remote monitoring 
program installed in the remote PC through LAN. Then, you shall select the camera to be
controlled. But, this remote control shall be applied only to SEC SCC-641, 643 Camera, and
SCC-421 Series (C4201, C4203, C4310, C4303) Camera which use the SAMSUNG
Protocol. You can select the camera to be controlled by the remote monitoring program.
Please refer to Remote Monitoring Program Use’s Manual for the detailed explanation of the
remote monitoring program.
[SCC-641/SCC-421]

8

The following illustrates the intial setting of the SYSTEM SETUP menu.

①

PASSWORD

Set the system password. You can enter a 4-digit number and the initial set value is 0000.

②

PASSWORD LOCK

If you set this to ON, you can ask for a password, which is set in the PASSWORD, each time the
MENU button is pressed or the recording lock cancellation is attempted during the recording, and stop
the respective operation if wrong password is entered. If set to OFF, you do not have to enter 
password for each case metioned above. [ON/OFF]

➂

HDD ERASE

If you set to ON and exit the menu, the system will delete all data stored on the HDD. [ON/OFF]

➃

FACTORY RESET

If you set to ON and finish the menu, all settings will be restored to their factory default settings.
However, the data on the HDD will not be deleted. [ON/OFF]

➄

MENU SCREEN

If this is set to DARK GRAY, the background of the screen becomes darker when the MENU button
is pressed and you will not be able to see the characters clearly. If set to OFF, you can see the current
video clearly even when the MENU button is pressed. [DARK GRAY/OFF]

➅

MULTIPLEXER SELECT

The settings of all recording modes will be dependent on the Multiplexer setting. The corresponding
Multiplexers are SAMSUNG SDM-160(SDM-090), SMO-150(SMO-210, SOM-080).

➆

LANGUAGE (MULTI-LANGUAGE SUPPORT)

Besides English, multi-language support provides German, French, Italian, and Spanish. 
You can conveniently set the desired language. The default language is set to English.
[ENGLISH/DEUTSCH/FRANÇAIS/ESPAÑOL/ITALIANO]

System Setup

SYSTEM SETUP

PASSWORD

****

PASSWORD LOCK

OFF

HDD ERASE

OFF

FACTORY RESET

OFF

MENU SCREEN

DARK GRAY

LANGUAGE

ENGLISH

COMMUNICATION SETUP

BAUD RATE

115,200

NETWORK ACCESS

ON

IP ADDRESS

0. 0. 0. 0

GATEWAY

0. 0. 0. 0

SUBNET MASK

0. 0. 0. 0

NETWORK USER ID

****

NETWORK USER PWD

****

PAN/TILT TYPE

SCC-641

Caution

Caution

Verify once again that is is OK to delete the data, as deleted data cannot be restored.

Содержание SHR-3010P














































Отзывы:

Нет отзывов