9
12
11
8
10
7
Item
Specifications
Voltage
AA Alkaline 1.5V Batteries (LR6) 4EA (6V)
Emergency
Power Source
9V Battery (6LF22) (Separately sold)
Operation
Method
Electronic Control Method
(Password entry or card or key tag reading or bluetooth)
Weight
0.8 kg (including both inner and outer bodies)
Product
Dimensions
Outer Body
82.8mm(D) x 19mm(H)
Inner Body
140mm(W) x 106mm(L) x 44mm(H)
When the door is closed, user can
set up the alarm function by pressing
and holding the [ ] button for
3 seconds until sound confirmation.
Open the battery cover of the inner
body and then press the [Register]
button or take out batteries.
High temperature Detection is operational at about 70°C±10°C
; this can vary depending on the installation environment.
When a fire breaks out, the temperature sensor detects it. The LED of the
[OPEN]button on the inner body flashes while the alarm sound is generated
for 15 seconds. After the alarm sound stops, the door is automatically opened.
Place the registered card or
key tag on the card reader,
or enter the password and
then press the [ ] button.
Place the registered card or
key tag on the card reader,
or enter the password and
then press the [ ] button.
●
You can delete all registered cards.
At-home security mode is to prevent opening of the door from outside while
someone is inside.
This function releases an alarm sound or emergency sound
This is a basic function of the lock when a user goes out.
This function generates the alarm sound when an attempt is made to forcefully
open the door from the inside. In the alarm function, if someone tries to open
the door from the inside, 'beep- beep-' sound is generated for 5 minute
The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to
the user’s preference. The product is set to generate all sounds at the factory.
(Set in 1 Step)
The Automatic Locking mode allows for automatic locking of the door when
it is closed.
Deleting Registered Cards
At-home Security
Set up Instructions for Alarm functions
This function generates an alarm sound and deactivates lock operation when
it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid
card, or if a wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes.
While the door is in this inactive mode, a single “DING” sound is generated
every 10 seconds and seven consecutive “DINGS” will sound after 3 minutes.
Following this, the lock is released from inactive mode.
Prank Prevention
If the batteries are not replaced after their replacement time comes, they will be
completely discharged and the lock will not operate.
Using the Emergency Battery
Press two random button before enter the password.
If the melody of “Blues for Elise” sounds when opening the door with the
password or a card (key tag), it is time to replace the batteries.
(The low battery indicator( ) is lighted when the melody sounds.)
1. After put up a battery holder,
insert two batteries in the lower section.
2. After put down a battery holder,
insert two batteries in the upper section.
- The unit will stop operating suddenly if the
batteries are not replaced.
AA Alkaline Batteries X 4EA
Replacing the Batteries
This function generates the alarm sound when fire is detected so that the
residence can quickly respond.
(The lock resumes normal operation if the inside temperature returns to a
normal level.)
High temperature Detection
Product Specifications
Releasing the alarm sound or emergency sound
Sound Setting and Releasing
Automatic/Manual Locking
1. Pressing the [Register] Button
At-home security Mode Activation
At-home security Mode Deactivation
Set up the Alarm function
Release the Alarm function
3. Entering the Number
2. Entering the Password
DING DONG
→
DING DING
Warning
Open the battery cover of
the inner body and press
the [Register] button for 3 seconds.
Enter the ‘88’ and then
press the [ ] button.
When the number pad is lighted,
enter the password and then
press the [ ] button.
Success:
DING DONG DENG
→
DING DING
Fail:
DING DONG DING DONG
DING DONG DING DONG
Success:
DING DONG DENG
DING DONG DENG
DING DONG DENG
DING DONG DENG
Fail:
DING DONG DING DONG
DING DONG
While the door is locked, press
[OPEN] button on the inner body
part for 3 seconds.
Briefly press the [OPEN] button on the inner
body to release it or set the manual locking
switch to [ ] and open the door to release it.
Open the battery cover of
the inner body and briefly
press the [Register] button.
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Automatic Locking:
The door is automatically locked 1 seconds after being closed.
This mode is not activated when the batteries are completely
discharged.
Manual Locking:
The door does not lock automatically, and [OPEN] button must
be pressed from the inside, touch [Number Pad] to close the door.
[31] + [ ] buttons: The sound of door
opening/closing and key entering is not
generated (except an alarm sound).
[32] + [ ] Button: 1 Step
All sounds are generated.
As levels increase,
the sound becomes louder.
DING DONG DENG
[21] + [ ] Button: Automatic Locking
[33] + [ ] Button: 2 Step
[22] + [ ] Button: Manual Locking
●
Warning
Regardless of the Automatic/Manual locking setting, If the door is not open
after unlocked the door, the door will lock automatically after 7 seconds.
When the At-home security mode is activated, the door cannot be
unlocked from the outside, so please be careful.
Be especially careful not to allow children to set this mode accidently from
the inside.
●
Warning
Depending on battery manufacturer, date of manufacture and the user
environment, the duration of use may vary.
●
The contents of this user guide are subject to change without prior notice to
the user in order to enhance performance of the product.
Liquid leaks from batteries can damage the product.
Check the batteries regularly (every 6 months).
●
After the battery replacement alarm has sounded, password/card
(key tag) information cannot be registered, changed, deleted, initialized
or configured until the batteries are replaced.
●
(In the case of average use, given as 10 times a day with a wireless module
not mounted, 4 AA Alkaline 1.5V batteries can last for 10 months.)
OR
OR
Inside
Battery Replacement Alarm Generation
Replacing the Battery
Purchase an emergency battery (9V) at the nearest store.
As the alkaline batteries offer longer life, they are recommended over the
manganese batteries or rechargeable ones.
While contacting a 9V battery to the external power (emergency battery)
contact on the outer body for 2 seconds or longer, place the card or key
tag or enter the password.
Opening the Door Using an Emergency Battery
Outside
OR
OR
OR
DING DONG DENG
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Press the [ ] button after pressing
[7] or [9] button, and the security mode
will be set.
[7] Button : Multi-leveled Security Code
Entry Mode
[9] Button : Common Mode
Default: 1 second
[51] : 1 second
[59] : 9 second
This function sets the time interval between the moment the open-door sensor
recognizes the door as closed and the moment deadbolt locks the door.
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock time.
Door Lock Time Setup
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Enter [51] ~ [59] button,
and then press [ ] button.
Peep, Peep
Press the [Number Pad] or
touch with a card,
then the sound for action
unavailable will be heard.
Open the battery cover of the
inner body and press the
[Register] button for 5 seconds.
When the number pad is lighted,
enter ‘4567890123’ and then
press the [ ] button.
Initialization (Password, Bluetooth, Card, Key Tag)
All registered data (password, Bluetooth, card, key tag) are deleted.
After initialization, the password is set to ‘1234’, and the registered card, key tag,
Bluetooth data are erased. Please change password as a new one after initialization.
Pressing the [Register] Button
Entering the Numbers for Initialization
DING DONG
→
DING DING
→
DING DING DING DING
Success:
DING DONG DENG
Fail:
DING DONG DING DONG
※
The High temperature Detection is a basic function of the lock,
and cannot be released by the user.
This section contains important information to ensure the user’s safety
and prevent potential damage to property. Please, read this section
carefully and use the product accordingly.
Warning
Safety Cautions
Caution
●
The user shall not install or repair the
product without authorization.
●
During battery replacement, use a new
one instead of the existing battery.
Long-term exposure to direct sunlight
may cause a crack on its touch pad.
Avoid exposure to direct sunlight during
installation.
Be sure to correctly match the poles (+/-)
when installing the batteries. Install the
batteries with the correct poles (+/-).
Do not use water, benzene or alcohol when
cleaning the product, as these fluids can
cause product malfunction.
Replace the batteries immediately after
the battery replacement alarm sounds.
Do not install the product in the place
where the gap between the door and
the frame is 5mm or more.
Make sure that no unauthorized person
has the access to the password.
Do not use the excessive force or sharp
objects to push the lockbuttons, as this
can damage the product.
Make sure that the door is completely
closed when going outside. The
manufacturer does not assume the
responsibility for any harm caused by
engagement of the lock on an improperly
closed door.
Do not operate the product with wet
hands, and keep liquids such as water
or drinks away from the product, or the
product may malfunction or be damaged.
●
●
●
●
●
●
●
●
●
Interference in wireless communication
may occur when this product is used.
●
According to the wireless communication
environment, its battery may consume
much.
●
This product is a keyless door lock.
Thus, if it does not work, you can damage
a part of the door lock.
You need to fully understand how to use
the manual locking switch to prepare for
an emergency.
[ Settings ]
※
All settings operate only when the door opens.
Open the battery cover of the
inner body and briefly press
the [Register] button.
Enter [11] or [00] and then press the [ ] button
to activate or deactivate the Bluetooth mode.
Bluetooth Mode
After the Bluetooth mode is activated, can authenticate the registered Bluetooth
smartphone to open the door. The Bluetooth mode is activated by default.
DING DONG
[11] button: Activate the Bluetooth mode.
[00] button: Deactivate the Bluetooth mode.
DING DONG DENG
Welcome Mode
Randomizer Mode
The welcome function is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
DING DONG DENG
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
[1]+[ ] button: Welcome function on, the
one-minute alarm function on
[2]+[ ] button: Welcome function on, the
one-minute alarm function off
[3]+[ ] button: Welcome function off
Double authorization mode requires both card and password to open the door,
ensuring more security. To setup the double authorization mode, more than
1 card must be registered.
Double Authorization Mode
DING DONG DENG
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Press the [ ] button after pressing
the [4] or [6] button, and the double
authorization mode will be set.
[4] Button : Double authorization mode on
[6] Button : Double authorization mode off
