Samsung SHC-737 Series, Руководство пользователя

Страница: 19 / 21

COLOR CCD CAMERA User Guide
36
COLOR CCD CAMERA User Guide
37
Specifications
SHC-737N SHC-737P
ELECTRICAL
Input Voltage AC 24V / DC 12V
Power Consumption 4.0W
VIDEO
Imaging Device 1/3" Super HAD CCD
Total Pixels 811(H) x 508(V) 795(H)x596(V)
Effective Pixels 768(H) x 494(V) 752(H)x582(V)
Scanning System 2:1 Interlace
Synchronization Internal / Line Lock
Frequency H : 15.734KHz / V : 59.94Hz H: 15.625KHz / V: 50.00Hz
Horizontal Resolution COLOR : 580TV lines (Min.) / B&W : 700TV lines (Min.)
Min. Illumination
COLOR : 0.05Lux (50 IRE , F1.2)
0.0002Lux (F1.2, SENS-UP)
B/W : 0.0025Lux (50 IRE, F1.2)
: 0.00001Lux (F1.2, SENS-UP)
S/N (Y Signal) 52dB (AGC Off, Weight On)
Video Output CVBS : 1.0Vp-p / 75Ω
OPERATIONAL
IRIS Adustment DC / VIDEO
Electronic Shutter Speed ESC (1/60(PAL : 1/50) ~ 1/120,000 sec) / MANUAL / A.FLK
On Screen Display
NTSC : Korea, English, Spanish, Japanese, French, Portuguese
PAL : English, French, German, Spanish, Italian, Chinese, Portuguese
Backlight Compensation BLC / HLC / OFF
Day & Night COLOR / B&W / AUTO (ICR)
Gain Control LOW / HIGH / OFF
White Balance ATW / AWC / MANUAL / INDOOR / OUTDOOR (1,700°K ~ 11,000°K)
SENS-UP (frame Integration) AUTO / OFF (x2 ~ x512)
Motion Detection ON / OFF (8 programmable zones , Alarm output)
Privacy Masking ON / OFF (8 programmable zones)
3D Noise Filter (SSNRII) ON / OFF (Level adjustable)
Digital Zoom ON / OFF (x2 ~ x10)
Digital Image Stabilization(DIS) ON / OFF
Camera Title
ON / OFF
Sharpness ON / OFF
Flip / Mirror ON / OFF
Communication RS - 485 (Baudrate 2400, 4800, 9600, 19200, 38400, 57600bps selectable)
Protocol Samsung Techwin Protocol, Pelco-D Protocol
ENVIRONMENTAL
Operating Temperature / Humidity -10°C ~ +50°C / 30% ~ 80% RH
MECHANICAL
Lens Mount C / CS Mount (Easy Focus type)
Back Focus Adjustment Manual
Dimension 65.8(W)x60.6(H)x101.9(D)mm
Weight 315g
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
* RS-485 Communication establishment initial value
Item Camera ID BAUD RATE UART MODE RET PKT
Initial value 1 9600 8-NONE-1 ENABLE
485 Control Board Connection Port RS-485 Control Port
(+) CONNECTION TERMINAL (TRX+) 485+
( - ) CONNECTION TERMINAL (TRX-) 485-
●
Nothing appears on the screen.
▶
Check that the power cord and line connection between the camera and monitor are fixed properly.
▶
Check that you have properly connected VIDEO cable to the camera VIDEO output jack.
▶ Check that the lens type is VIDEO lens or DC lens.
●
The image on the screen is dim.
▶ Is lens stained with dirt? Clean your lens with soft, clean cloth.
▶
Set the monitor to proper condition.
▶ If the camera is exposed to too strong light, change the camera position.
●
The image on the screen is dark.
▶
Adjust the contrast feature of the monitor.
▶
If you have an intermediate device, set the 75Ω / Hi-z properly.
●
The camera is not working properly, and the surface of the camera is hot.
▶
Check that you have properly connected the camera to an appropriate power source.
●
The DAY/NIGHT menu does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
●
The SENS-UP function does not work.
▶
Check that AGC of EXPOSURE SETUP menu is ‘OFF’.
▶ Check that SHUTTER of EXPOSURE SETUP menu is ‘A.FLK’ or ‘MANUAL’.
●
The Motion Detection function does not work.
▶ Check that MOTION DEF of SPECIAL SETUP menu is ‘OFF’.
●
Color is not correct.
▶ Check the setting of WHITE BAL SETUP menu .
●
The screen flickers continually.
▶
Check that direction of camera turns toward the Sun.
●
RS-485 communication fails.
▶
Check the polarity between RS-485 Control Port and RS-485 cable.
▶
Check the RS-485 Communication establishment initial value
▶
We recommend that you make ground connect between camera and controller in order to maintain
safety communication control.