97
96
Alert Type
(Menu 5.3)
This menu allows you to specify how you are to
be informed of incoming calls.
The following options are available:
Light only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu option (Menu
5.1); see page 96.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 5.4)
This menu allows you to select a tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
Sound Settings
Sound Settings
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call,
when you make an error or when your call is
connected to the system.
Note: When the phone is in the silent mode (see
page 30), you cannot change the sound
settings.
Ring Tone
(Menu 5.1)
This menu allows you to select a ring melody.
You can choose between many different
melodies. Each time you select a melody, it plays
for a few seconds. If you have downloaded
sounds from the Internet or the EasyGPRS
programme, you can use them in this menu.
Ring Volume
(Menu 5.2)
This menu allows you to adjust the ring volume
to one of five levels.
Use the
and
keys or the
and
keys
on the left side of the phone to increase or
decrease the volume.