119
Access Codes
118
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, refer to page 82 (menu
option
4.6.7
).
PUK2
The 8-digit PUK2 (
P
in
U
nblocking
K
ey
2
),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
To re-enable your PIN2:
1. Key in the PUK2 and press the
OK
soft key.
2. Enter a new PIN2 of your choice and press
the
OK
soft key.
3. When the
Confirm PIN2
message is
displayed, key in the same code again and
press the
OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
Barring Password
The 4-digit barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function. See page 100 for
further details.