42
43
I
In
n-
-C
Ca
al
ll
l
O
Op
pt
ti
io
on
ns
s
In-Call Options
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
To place a call on hold, simply press the
Hold
soft
key. You can reactivate the call whenever you want,
by pressing the
Unhold
soft key.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Hold
soft key.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap
soft key.
The current call is placed on hold and the call on hold
is reactivated so that you can continue conversing
with the other party.
When you have finished, end each call normally by
pressing the
key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the
Options
soft key.
2. If necessary, press the
key to highlight the
Mute
option.
3. Press the
OK
soft key.
Your correspondent can no longer hear you.
