62
Menu functions
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- APOP login: connect to the server by using the
APOP login scheme when this option is selected.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or domain
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- Include attachments: select this option to
receive attachments with e-mails.
- Max. Emails retrieved: set the number of
headers you will retrieve from the server.
• Email profile: configure the network settings
required to send or receive e-mails.
Current profile: select a profile.
Profile settings: configure up to five e-mail
profiles. For each profile, the following options are
required to connect to the GPRS network:
- Profile name: enter a name for the e-mail
profile.
- APN: enter the access point name used for the
GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
• Block list: specify e-mail addresses from which
messages will not be accepted. You can also
specify message subjects that you will not accept.
Push message
(Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: specify the address of the server
from which you want to receive push messages.