Samsung SF4500, Руководство по обслуживанию

Страница: 3 / 130

1-1 Samsung Electronics
1-1 Safety Precautions
1. Be sure that all built-in protective devices are in
place. Restore any missing protective shields.
2. Make sure there are no cabinet openings through
which people- particularly children- might insert
fingers or objects and contact dangerous
voltages.
3. When re-installing chassis and assemblies, be
sure to restore all protective devices, including
control knobs and compartment covers.
4. Design Alteration Warning:
Never alter or add to the mechanical or electrical
design of this equipment, such as auxiliary
connectors, etc. Such alterations and
modifications will void the manufacturer’s
warranty.
5. Components, parts, and wiring that appear to
have overheated or are otherwise damaged
should be replaced with parts which meet the
original specifications. Always determine the
cause of damage or overheating, and correct any
potential hazards.
6. Observe the original lead dress, especially
near sharp edges, AC, and high voltage power
supplies. Always inspect for pinched,
out-of-place, or frayed wiring. Do not change
the spacing between components and the
printed circuit board.
7. Product Safety Notice:
Some electrical and mechanical parts have
special safety-related characteristics which might
not be obvious from visual inspection. These safe-
ty features and the protection they provide could
be lost if a replacement component differs from
the original. This holds true, even though the
replacement may be rated for higher voltage,
wattage, etc.
Components critical for safety are indicated in the
parts list with symbols
. Use only replace-
ment components that have the same
ratings, especially for flame resistance and dielec-
tric specifications. A replacement part that does
not have the same safety characteristics as the
original may create shock, fire, or other
safety hazards.
Follow these safety, ESD, and servicing precautions to prevent personal injury and equipment damage.
1. Precautions