Samsung SF-560 Series Скачать руководство пользователя

Страница: 186 / 218

ROUBLESHOOTING

9.9

[Incompatible]

The remote machine does

not have the requested

feature, such as a delayed

transmission.

It also occurs if the remote

machine does not have

enough memory space to

complete the operation you

are attempting.

Reconfirm the remote machine’s

features.

[Jam 1] or

[No Cartridge]

The toner cartridge is not

installed.

Install the toner cartridge. See

page 1.10.

[Line Busy]

The remote person did not

answer or the line is already

engaged.

Try again after a few minutes.

[Line Error]

Your machine cannot

connect with the remote

machine or has lost contact

because of a problem with

the phone line.

Try again. If the problem

persists, wait an hour or so for

the line to clear and try again.

Or, turn the ECM on. See

page 6.35.

Load Document

You have attempted to set

up a copy or fax operation

with no document loaded.

Load a document and try again.

Low Heat Error

There is a problem in the

fuser unit.

Unplug the power cord and plug

it back in. If the problem

persists, please contact a service

representative.

Open Heat Error

[Over Heat]

[LSU Error]

A problem has occurred in

the LSU (Laser Scanning

Unit).

Unplug the power cord and plug

it back in. If the problem

persists, please call for service.

Memory Full

The memory is full.

Delete unnecessary documents,

retransmit after more memory

becomes available or split the

transmission into more than one

operation.

[No Answer]

The remote fax machine has

not answered after several

redial attempts.

Try again. Make sure that the

remote machine is operational.

Display

Meaning

Suggested solutions

Содержание SF-560 Series



























































































































































































































Результаты поиска

Содержание SF-560 Series

Отзывы:

Похожие инструкции для SF-560 Series

Бренды по названию

Популярные бренды

Samsung SF-560 Series, Руководство пользователя

Результаты поиска

Содержание SF-560 Series

Отзывы:

Похожие инструкции для SF-560 Series

Бренды по названию

Популярные бренды