Samsung SF-3100 Скачать руководство пользователя | Manualshive

Страница: 85 / 111

background image

Care and Maintenance

7-13

Chapter 7

LCD Error Messages

Display

Meaning

RETRY REDIAL?

The machine is waiting to automatically redial another fax
number that was busy or did not answer.

DOCUMENT JAM

The document you are sending has jammed in the feeder.
Clear the document jam, see “Clearing Jams” on page 7-16.

LOAD DOCUMENT!

You have tried to send a fax and there is no document loaded
into the machine.

NO ANSWER

The other machine has not answered after all your attempts
to redial. Or, the other operator does not press START.

NO. NOT ASSIGNED

There is no number assigned to the One-Touch button or
two-digit Speed number you choose.

POLLING ERROR

The machine you want to poll is not ready to answer your
poll. The person you are polling should have loaded their fax
machine with a document and be in send poll state.

SEND ERROR

Your fax has not gone through successfully. Try again.

INK LOW

The Print Cartridge has run out of ink. Install a new Print
Cartridge.see “Ink Level View” on page 7-10.
When this message is displayed, you cannot make a copy or
print a report. But, stored data in memory can be printed by
replacing the cartridge with new one.

MEMORY FULL
MEMORY LOW

Memory has become full or low. Either delete unnecessary
documents stored in memory, or send when memory
becomes available, or split the new document into smaller
parts.

NO CARTRIDGE

Print Cartridge is not installed or properly installed.

CHECK PAPER

Printer is out of paper. Load paper and press Start/Enter. If
printing paper is jammed during printing. Clear the paper
jam, and press Start/Enter.

RECEIVE ERROR

A fax has not been received successfully. Ask the sender to
try again.

MEMORY RECEIVED

When it toggles with:

Due to some reasons, the machine stored data in memory.
You neither can make a copy nor print a report before
printing the stored data memory.
Do one of the following as per each message:

INK LOW

CHECK PAPER

NO CARTRIDGE

Replace the print cartridge with new one.
Load the paper, and press Start/Enter.
There might be a jam, clear the jam as described “Paper
Jams During Printing” on page 7-16.
Install a print cartridge.

LOW BATTERY (SF-3100T Only)

The backup battery is weak. Replace battery.

NO BATTERY (SF-3100T Only)

The backup battery is not installed or is completely
discharged. Install/replace battery.

NO MESSAGE (SF-3100T Only)

There is no message to play or erase.

NO NEW MESSAGE (SF-3100T Only)

There are no new caller message.

MEMORY FULL[TAM]
(SF-3100T Only)

The voice memory is full. No more caller’s messages can be
recorded. (Total recording time is about 12 minutes.)

«
...
83
84
85
86
87
...
»

Содержание SF-3100
















































































































Отзывы:

Нет отзывов

Похожие инструкции для SF-3100

Бренд: UnionSpecial Страницы: 32

Бренд: Singer Страницы: 48

Бренд: Singer Страницы: 99

Бренд: Bright Solutions Страницы: 21

Бренд: ROOTS Страницы: 164

Бренд: Janome Страницы: 2

Бренд: Pfaff Страницы: 30

Бренд: Kärcher Страницы: 269

Бренд: Olivetti Страницы: 76

Бренд: JUKI Страницы: 49

LBH-1790A Series

Бренд: JUKI Страницы: 5

Бренд: JUKI Страницы: 33

Бренд: JUKI Страницы: 204

Бренд: SunStar Страницы: 21

Бренд: SunStar Страницы: 37

Бренд: SunStar Страницы: 50

Бренд: Bartell Страницы: 47

Бренд: LAUREL Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды