Samsung SEW-3030, Руководство пользователя

Страница: 29 / 33

28
Troubleshooting
If you have problems with the system, there is often a quick and simple
solution. Please try the following:
Problem Solution
No picture from a
camera
1. Check all connections to the camera.
Make sure the adaptor is plugged in.
2. Make sure that the cameras and receiver are both ON.
3. Make sure that the camera is in range of the receiver.
4. If using the battery adaptor, try replacing the batteries
5. Make sure the camera and monitor are paired.
The picture is dropping
1. Move the camera closer to the receiver.
2. Try repositioning the camera, receiver or both to improve
the reception.
3. Adjust the monitor antenna to vertical position.
Audio problems
1. Ensure that the volume on the TV is on.
2. Make sure that there is sound within range
of the camera microphone
3. If the unit emits a loud screeching noise (feedback),
move the camera or receiver farther apart.
The picture is or
has become choppy
The picture may become choppy when experiencing a lower
frame rate (i.e. 10 frames per second vs. a higher 20 frames per
second).
1. Try moving the camera closer to the receiver.
2. Remove obstructions between the receiver and camera.
3. Adjust the monitor antenna to vertical position.
The Picture appears
to be grainy when
using AV out function
to view on a large
screen TV/Monitor
The purpose of the AV output is for convenience only. When
using with large screen TV/Monitor, the picture might be grainy
as the camera limits video resolution to VGA (640x480 pixels).
This is not a product defect.
1. For best performance use with TV/Monitor PIP (Picture in
Picture) function. Check your TV/Monitor product manual to
see
if this feature is available on your TV/Monitor
2. View video on a smaller screen TV/Monitor
NOTE:
Low batteries will cause the supply current to become unstable and will affect
the quality of the video/audio. Please charge the battery fully or replace the batteries for
use for superior video