Samsung SEW-3030, Руководство пользователя

Страница: 13 / 33

1 2
Night Vision
This camera has built-in IR LED’s, which provides the camera with the ability to
view images in no/low light conditions. It is important to use the provided power
adaptor (and not the batteries) when using the camera for prolonged periods in
low light conditions, as the built-in IR LED’s will deplete the battery more quickly
than regular daytime use.
Installing the Camera
1. Carefully unpack the camera.
NOTE: If you are installing cameras that
did not come with the system, please see
the pairing camera section of this manual
for details on installation.
2. Mount the camera to the wall.
Mark the position of the screw holes on
the wall, and drill holes and insert 2
screws, then firmly attach the camera to
the wall by placing the stand over the
installed screws and pushing the base
downwards.
NOTE: The camera can also be placed on
a flat surface, such as a table or shelf,
and no mounting hardware is required.
3. Adjust the viewing angle of the camera
NOTE: You can install additional cameras (maximum of 4 cameras). When
adding cameras that were not included in the original box, you will need to pair
up the cameras with the receiver.
Refer to the camera pairing section of this manual.