Using the Multi-Bay Docking Station 31
Changing a 5.25” Device
To change from one 5.25” device to another simply follow the steps below (Figure 25).
1. Turn off the system,
2. Detach the system from the docking station,
3. Slide the 5.25” bay latch toward the middle of the docking bay,
4. The device will pop out about an inch,
5. Remove the device,
6. Insert the new 5.25” device into the docking bay until the bay latch clicks.
Changing a 3.5” Device
The method of changing a 3.5” device is same as changing a 5.25” device except you
have to use 3.5” bay latch instead of 5.25”s (Figure 25).
