English
_
●
C
A
me
RA
Se
TU
p
FoCUS mode
You can select a focus mode according to the angle that you adjusted for camera
recording.
- AF : This will monitor the screen continuously
to focus automatically. If you adjust the focus
manually, that will operate the same as in <
mF
>.
This will also restore focus after the operation of
zoom.
SENSITIVITY : Indicates the sensitivity of auto
focus, which you can adjust between level 1
and level 7. The closer your setting is to 7, the
more sensitively the auto focus function performs.
The Night setting is used when a strong light
reflects in a low contrast scene.You can set
it to OFF, LOW, MEDIUM, or HIGH; set it to
<HIGH> when there exist a strong light such as
street light.
- ONEAF : Restores focus after the operation of
zoom, and operates the same as in <
mF
> unless
the operation of zoom is executed.
- MF : You can adjust the focus manually.
While you are working on the following objects,
<
AF
> may not work properly.
If this is the case, use <
MF
> instead.
- Very bright object, or dominant object in a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
Zoom Speed
You can adjust the zoom operation speed.
dISpLAy Zoom
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
M
DAY/NIGHT
AUTO
WHITE BAL
FOCUS MODE
ONEAF
ZOOM SPEED [3]
DISPLAY ZOOM
OFF
DIGITAL ZOOM
OFF
DETAIL
[2]
V-SYNC
(INT)---
AGC COLOR SUP
MID
AF
SENSITIVITY
[5]
Night
MEDIUM
Z6809126301A-SCV-3120-PAL-ENG.in29 29
2010-4-30 17:37:39
