Samsung SCH U520 - Cell Phone - ALLTEL Wireless, Руководство пользователя, Страница: 83 / 278

Section 6: Understanding Your Contacts 83
Finding a Contacts Entry
Section 6
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold the key to launch
VoiceSignal .
“ Say a Command ” appears in the display and is
pronounced through the speaker.
2. Say “ Lookup ”.
VoiceSignal prompts you to “ Say the name. ”
3. Speak clearly and say the full name of the person you
want to call, exactly as it is entered in your contact list.
䢇
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
䢇
If VoiceSignal does not recognize the name you said, a choice
list of up to three names appears in the display, and
VoiceSignal prompts you with “
Did you say? ” followed by the
first name on the list.
4. Say “ Yes ” to confirm the name or “ No ” to hear the next
name, or use the keypad to select the correct name
from the list. (See “Choice Lists” on page 177, for more
information.)
䢇
To say the name again, press the Repeat (right) soft ( )
key.
䢇
To exit VoiceSignal without dialing, press the Settings (left) soft
( ) key, then press the Exit (right) soft ( ).
5. The contact information for the name you selected
appears in the display.