25
1.
In Standby mode, press and hold
.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2.
Say “
Call
”.
VoiceSignal prompts you to “
Say the name or #
”.
3.
Speak clearly and say the telephone number of the person
you want to call.
For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “
Did you say?
” followed by the first
number on the list.
4.
Say “
Yes
” to confirm the number or “
No
” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to
“Choice Lists”
on
page 104.)
•
To say the name again, press the
Repeat
soft key.
•
To exit Voice Dial without dialing, press
.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) P pause(s) simply
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including:
Silence All
,
Vibrate
,
Low
,
Low/Medium
,
Medium
,
Medium/High
, or
High
, and/or
different
ring types to distinguish callers. You can add vibration to any ring
volume setting.)
•
A phone number (unless blocked by the caller) and a name display on
the screen (If the caller’s number and name are stored in your Contacts
list).
•
If the caller can’t be identified,
Call from unavailable#
,
Call from
restricted number
, or no number appears in the display.
•
Your phone continues to notify you of the call until one of the following
events occurs:
–
You answer the call.
–
You ignore the call.
–
You mute the ringer.