SAMSUNG Proprietary-Contents may change without notice
Test Procedure
6-5
This Document can not be used without Samsung's authorization
6-5 Test Procedure
6-5-1 Change the test mode
A. To change the phone's state from Normal Mode to Test Mode, You should press following keys.
"
4 7 * 6 8 # 1 3 5 8 0
"
B. To Enter suspend mode press "
001
"
C. Press "
021
" then You can set channel "
2xxxx
"
Example : "
2 0363
"
Channel number
Mode : CDMA
and press
the right soft key(Soft2 key)
to save mode/channel value..
D. To finish the Test Mode, You should enter the command "
002
".
6-5-2 Channel selection and Tx power output level control
A. Enter to Test Mode [
4 7 * 6 8 # 1 3 5 8 0
]
B. "001" : Suspend.
C. "009"
"0363"
[ Push the right soft key ] : Set to '0363' channel.
D. "007" : Carrier On.(TX On)
E. "014" : Spread spectrum to 1.23MHz band width.
F. "016" " xxx " : Adjust RF power level. "xxx" means AGC level (000~ 511)
G. To finish the Test Mode, You should enter the command "002".