9
1. To attach the battery pack after
charging, align it with the phone
about 1cm (1/2”) away from its place
so that the two arrows on the phone
are seen, the battery charge contacts
pointing downward.
displays the dialed
numbers and the
current status
2. Slide the battery pack upwards until
it clicks firmly into position.
Result:
Your phone is now ready to be
turned on.
8
Installing the Battery Pack
3. To remove the battery pack, release it
by pressing the button on the rear of
the phone.
4. Slide the battery pack downward
about 1cm (1/2”) and lift it away from
the phone.
LCD Display and Indicators
blinks while your phone selects a channel
and lights up when the line is connected.
NOSVC: no service area
SVC: service area
lights up when your phone is out of the
home area.
CDMA: digital mode
displays the signal strength level with
the number of bars.
displays the battery charge level status with
the number of blocks.
indicates you have voice mail or text
messages.
indicates the vibration mode.
indicates silent mode (lamp mode).
SCH-670 (1-19) 11/23/98 3:16 PM Page 8